Remote Operation; Review Settings - AT&T 1739 User Manual

Remote operation

�onnect with the answering system
You can access many features remotely
from a touch tone telephone.
�. Dial your telephone number.
2. When the system answers,� enter
your three-digit remote access code
during or after the announcement.
The system announces the number of
messages,� then begins playing back
the messages. If the announcement
continues to play after you have entered
Feature summary
FUN�TION:
VOI�E HE�P MENU
P��� ��� MESS�GES
P��� NEW MESS�GES
REPE�T � MESS�GE
STOP NEW P���B���
S�IP � MESS�GE
S�VE MESS�GE
DE�ETE MESS�GE
DE�ETE ��� MESS�GES
RE�ORD �NNOUN�EMENT
REVIEW �NNOUN�EMENT
RE�ORD MEMO
SET THE ��O��
TURN S�STEM OFF
TURN S�STEM ON

REVIEW SETTINGS

your code,� wait for the announcement
to end or press # to stop the
announcement,� then re-enter the
code.
3. To use a remote access command
(below),� press 5 during message
playback and wait for the two-beep
signal.
4. Enter a remote access command.
�OMM�ND:
Press 5.
After the two beeps,� wait four seconds for the
system to automatically play back all messages,� or
press 1.
Press 2.
Press 4 while the message is playing.
Press 5 while the message is playing.
Press 6 while the message is playing.
Hang up.
Press 3 while the message is playing.
After listening to all messages and the system has
beeped twice,� press 3 twice.
Press *7,� after the beep. Record the announcement,�
and press 5 to stop. The system will then play back
the announcement.
Press 7.
Press #,� and speak after the beep. Press 5 to exit.
Press *8. Follow the prompts to set day,� time,� and
year.
Press *0.
When the system is off,� it answers after �0 rings,�
and announces "The machine is off." The system
beeps twice. You can leave a message by pressing
#,� hang up to exit,� or turn the system on by either:
�. Press *0,� the system announces "The machine is
on, XX minutes to record," then beeps twice. The
system is now turned on.
-OR-
2. Enter your three-digit remote access code,� press
5 during the message playback,� then press 0.
Press 9.
�