812
7-2. Steps to take in an emergency
Stopping the engine <hybrid system>
■
Shift the shift lever to P and press the "START STOP ENGINE" <"POWER"> switch
as you normally do when stopping the engine <hybrid system>.
Replacing the key battery
■
As the above procedure is a temporary measure, it is recommended that the elec-
tronic key battery be replaced immediately when the battery is depleted. (P. 719)
Changing "START STOP ENGINE" <"POWER"> switch modes
■
Release the brake pedal and press the "START STOP ENGINE" <"POWER"> switch
in step
above.
3
The engine <hybrid system> does not start and modes will be changed each time the
switch is pressed. (P. 202, 209)
When the electronic key does not work properly
■
Make sure that the smart access system with push-button start has not been deac-
●
tivated in the customization setting. If it is off, turn the function on.
(Customizable features P. 862)
Check if battery-saving mode is set. If it is set, cancel the function. (P. 131)
●
ES350_300h_OM_OM33A60U_(U)