158
3-3. Adjusting the seats
Recall procedure
■
Check that the shift lever is in P.
1
Turn the "START STOP ENGINE" <"POWER"> switch to IGNI-
2
TION ON <ON> mode.
Press one of the buttons for the
3
driving position you want to
recall until the buzzer sounds.
To stop the position recall operation part-way through
■
Perform any of the following:
Press the "SET" button.
●
Press button "1", "2" or "3".
●
Operate any of the seat adjustment switches (only cancels seat position recall).
●
Operate the tilt and telescopic steering control switch (only cancels steering wheel
●
position recall).
Seat positions that can be memorized (P. 154)
■
The adjusted positions other than the position adjusted by lumbar support switch can
be recorded.
ES350_300h_OM_OM33A60U_(U)