Test the HomeLink
3
by pressing the newly pro-
grammed button and observ-
ing the indicator light:
If the indicator light is solid/
●
continuous, programming
has been completed and
your device should activate
when the HomeLink
ton is pressed and released.
If the indicator light blinks
●
rapidly for 2 seconds and
then turns into a solid/con-
tinuous light, proceed with
the following instructions
for programming a roll-
4
ing code system.
ES350_300h_OM_OM33A60U_(U)
5-7. Other interior features
®
operation
®
but-
639
5