Lexus ES350 Manual page 107

System check display
■
After turning the "START STOP ENGINE" <"POWER"> switch to IGNITION ON
<ON> mode, "SYSTEM CHECK" is displayed while system operation is checked.
Eco Driving Indicator (gasoline vehicles)
■
Suggests Zone of Eco driving and Eco driving
ratio based on acceleration.
Eco Driving Indicator Light
1
Eco Driving Indicator Light availability can
be customized. The default setting is off.
(P. 862)
During Eco-friendly acceleration (Eco driv-
ing), Eco Driving Indicator Light will turn
on.
When the acceleration exceeds Zone of
Eco driving, or when the vehicle is stopped,
the light turns off.
Eco Driving Indicator Zone Display
2
Zone of Eco driving
3
Eco driving ratio based on acceleration
4
If the acceleration exceeds Zone of Eco driving, the right side of Eco Driving Indi-
cator Zone Display blinks.
Eco Driving Indicator will not operate in the following conditions:
The shift lever is anything other than D.
●
Neither normal mode nor Eco drive mode is selected. (P. 300)
●
The vehicle speed is approximately 80 mph (130 km/h) or higher.
●
Outside temperature display
■
In the following situations, the correct outside temperature may not be displayed, or
the display may take longer than normal to change.
When stopped, or driving at low speeds (less than 12 mph [20 km/h])
●
When the outside temperature has changed suddenly (at the entrance/exit of a
●
garage, tunnel, etc.)
ES350_300h_OM_OM33A60U_(U)
2. Instrument cluster
107
2