108
2. Instrument cluster
Setting display automatic cancelation
■
In the following situations, setting display in which the settings can be changed
through the "DISP" button will automatically be turned off.
When a warning message appears while the setting display is displayed
●
When the vehicle begins to move while the setting display is displayed
●
Tire inflation pressure
■
It may take a few minutes to display the tire inflation pressure after the "START
●
STOP ENGINE" <"POWER"> switch is turned to IGNITION ON <ON> mode. It
may also take a few minutes to display the tire inflation pressure after inflation pres-
sure has been adjusted.
"---" may be displayed if the tire position information cannot be determined due to
●
unfavorable radio wave conditions.
Tire inflation pressure changes with temperature. The displayed values may also be
●
different from the values measured using a tire pressure gauge.
Liquid crystal display
■
Small spots or light spots may appear on the display. This phenomenon is character-
istic of liquid crystal displays, and there is no problem continuing to use the display.
Customization
■
Setting of available languages can be changed. (Customizable features P. 862)
ES350_300h_OM_OM33A60U_(U)