782
7-2. Steps to take in an emergency
Follow the correction procedures.
A warning message is shown on the multi-information display. After taking
the specified steps to correct the suspected problem, check that the
warning message goes off.
Warning message
(If equipped)
(U.S.A. only)
ES350_300h_OM_OM33A60U_(U)
Details
Indicates that the Auto-
matic High Beam switch
is pressed while the head-
lights are in low beam.
Indicates that the washer
fluid level is low
Indicates that all mainte-
nance according to the
driven distance on the
*
maintenance schedule
should be performed
soon.
Comes
on
approxi-
mately
4500
miles
(7200 km) after the
maintenance data has
been reset.
Correction procedure
Turn the high beam on
and press the Automatic
High Beam switch again.
Add washer fluid.
If necessary, perform
maintenance.