Adjusting sound quality and volume balance
Press
1
Pressing
2
About iPod
■
"Made for iPod" and "Made for iPhone" mean that an electronic accessory has
●
been designed to connect specifically to iPod, or iPhone, respectively, and has
been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with
●
safety and regulatory standards. Please note that the use of this accessory with
iPod or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc.,
●
registered in the U.S. and other countries.
iPod functions
■
When an iPod is connected and the audio source is changed to iPod mode, the
●
iPod will resume play from the same point in which it was last used.
Depending on the iPod that is connected to the system, certain functions may not
●
be available. If a function is unavailable due to a malfunction (as opposed to a sys-
tem specification), disconnecting the device and reconnecting it once again may
resolve the problem.
While connected to the system, the iPod cannot be operated with its own controls.
●
It is necessary to use the controls of the vehicle' s audio system instead.
When the battery level of an iPod is very low, the iPod may not operate. If so, charge
●
the iPod before use.
Supported models (P. 537)
●
ES350_300h_OM_OM33A60U_(U)
5-4. Using the audio system
to enter iPod menu mode.
changes sound modes. (P. 569)
535
5