Peripheral Receptacle Functions - Miller Electric Auto-Axcess 450 Owner's Manual

3-10. Peripheral Receptacle Functions

C C
B B
D
A
L
E
M
K K
F F
J
H
*Circuit common is same electrical reference point.
**Speed of Jog + (advance) and Jog − (retract) is 60 ipm for 3 seconds, then it automatically changes to 700 ipm.
Note: A customer supplied matching amphenol plug, factory Part No. 194 847, [Amphenol Part No. 97-3106A-20-33P(B)(621) and strain relief
clamp 97-3057-12(0621)] is required to use peripheral receptacle.
Function
Purge
Coolant Flow
Switch Input
Signal Signal
Jog
Retract
Touch Sensor ON
And Output Signal And Output Signal
Ref. 803 245-B
Socket Socket Information
A Not used.
B Not used.
C* Circuit common.
D Contact closure to C completes 40 volts dc
solenoid circuit to purge shielding gas line.
E Contact closure to F indicates coolant flow switch is
closed and recirculating coolant system is
operational.
F* Circuit common.
H** Contact closure to circuit common advances
welding wire at wire drive assembly.
J** Contact closure to circuit common retracts welding
wire at wire drive assembly.
K Contact closure to L energizes Touch Sensor
circuitry.
L* Circuit common.
M Part touched +24 volts dc output signal referenced
to circuit common.
OM-210 540 Page 17