Sensor (Adf Media Exit) Static Jam Service Check - Lexmark X651de Service Manual

7462
Step
4
Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?
5 Perform a print test using the ADF.
Does the problem remain?

Sensor (ADF media exit) static jam service check

Use this procedure for the following jams:
• 294.00
1
Check the media path.
Is the media path free of media or media fragments?
2 Check the sensor (ADF media exit) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SCANNER TESTS.
3. Touch Sensor Tests.
4. Observe the line "sensor (ADF media exit)"
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked?
3
Check the sensor (ADF media exit) for proper connection.
Is the above component properly connected?
2-132
Service Manual
Check Yes
Replace the ADF Problem solved.
controller card
assembly.
Go to "ADF
controller card
removal (models
X651, X652,
X654, X656, and
X658)" on
page 4-65.
Go to step 5.
Contact next Problem solved.
highest level of
tech support.
Go to step 2. Remove any
media or media
fragments.
Go to step 4. Go to step 3.
Replace the Replace the
sensor (ADF connection.
media exit).
"Sensor
Go to
(ADF media exit)
fan bracket
assembly
removal (models
X652, X654,
X656, and
X658)" on
page 4-87
or
"Sensor (ADF
media exit)
bracket
assembly
removal (X651)"
on page 4-88
No