7462
Sensor (ADF sheet through) static jam service check
Use this procedure for the following jams:
• 290.00
1
Check the media path.
Is the media path free of media or media fragments?
2
Check the sensor (ADF sheet through) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SCANNER TESTS.
3. Touch Sensor Tests.
4. Observe the line "sensor (ADF sheet through".
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked?
3
Check the sensor (ADF sheet through) for proper connection.
Is the above component properly connected?
4
Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?
5
Perform a print test using the ADF.
Does the problem remain?
2-120
Service Manual
Go to step 2.
Remove any
media or media
fragments.
Go to step 4.
Go to step 3.
Replace the
Replace the
sensor (ADF
connection.
sheet through).
Go to
"Sensor
(ADF sheet
through)
removal (models
X651, X652,
X654, X656, and
X658)" on
page
4-80.
Replace the ADF
Problem solved.
controller card
assembly.
"ADF
Go to
controller card
removal (models
X651, X652,
X654, X656, and
X658)" on
page
4-65.
Go to step 5.
Contact next
Problem solved.
highest level of
tech support.