Input Program; Set The Repeat Count - Yamato DNF 400 Instruction Manual

Input Program; Set the Repeat Count

Repeat count setting procedure
1
① Select the "Rep. count" and press the ENTER key. The setting edition screen is displayed. The
blinking "" (cursor) goes out and the setting value blinks instead.
ENTER
② Select the value using "▼▲" and press the ENTER key. The setting is decided and the screen
returns to the setting item selection screen.
Rep. count
S07
③ Press the CANCEL key to cancel the input. The value is cancelled and the screen returns to the
setting item selection screen.
Rep. count
S07
④ Press the PROGRAM key to display the next selection screen after the repeat count setting is
completed.
Rep. count
S07
(Selection screen)
DOOR
1
TROUBLE
ENTER CANCEL
(Decide the input)
DOOR
3
TROUBLE
ENTER CANCEL
(Cancel the input)
► Endless
→
Rep. count
S07
→
(Selection screen)
Rep. count Endless
S07
→
(Selection screen)
31
Operation Method
Rep. count Endless
S07
(Edition screen)
DOOR
1
TROUBLE
ENTER CANCEL
DOOR
TROUBLE
ENTER CANCEL