Control Panel - Yamato DNF 400 Instruction Manual

Control Panel

5
FIXED TEMP
6
AUTO STOP
7
AUTO START
8
PROGRAM
9
STANDBY
10
END
11
HEATER
FAN
12
1
Main Display：
2
Sub Display：
3
DOOR lamp：
4
TROUBLE Lamp：
5
FIXED TEMP lamp：
6
AUTO STOP Lamp：
7
AUTO START Lamp：
8
PROGRAM Lamp：
9
STANDBY Lamp：
10 END Lamp：
11
HEATER Lamp：
12 FAN Lamp：
13 FUNCTION Key：
14 PROGRAM Key：
15 MENU Key：
16 ▼(Down) Key：
17 ▲(Up) Key：
18 ENTER Key：
19 CANCEL Key：
20 POWER Key：
21 SUBMENU Key：
Description and Function of Each Part
1
℃
FUNCTION PROGRAM MENU
13 14 15
Displays the measured temperature and error code.
Displays the operation and setting information.
Lights while the door is opened. (Disabled in this unit.)
Blinks when a trouble occurs.
Lights while the fixed temperature operation is running.
Blinks while the choosing operation mode.
Lights while the auto stop operation is running.
Blinks while choosing the operation mode.
Lights while the auto start operation is running.
Blinks while choosing the operation mode.
Lights while the program operation is running.
Blinks while choosing the operation mode.
Lights while the device is in standby state.
Blinks while the device is in startup wait state.
Blinks at end of the autostop or program operation.
Lights while the heater works.
Lights while the fan works.
Starts the function menu.
Starts the program menu.
Starts the operation menu.
Lowers down the setting value.
Rises up the setting value.
Settles the inputted value/item.
Cancels the current inputting.
Turns ON/OFF the power.
Used for operation with the optional accessory.
2
ENTER
16 18
17
12
3 4 21
DOOR
SUBMENU
TROUBLE
POWER
CANCEL
20
19