Input Program; Set The Temperature - Yamato DNF 400 Instruction Manual

Input Program; Set the Temperature

Temperature setting procedure
1
① Select the "Set TEMP" and press the ENTER key. The temperature setting edition screen is
displayed. The blinking "" (cursor) goes out and the setting value blinks instead.
ENTER
② Select the temperature using "▼▲" and press the ENTER key. The setting is decided and the
screen returns to the setting item selection screen.
Set TEMP
S01
③ Press the CANCEL key to cancel the input. The value is cancelled and the screen returns to the
setting item selection screen.
Set TEMP
S01
④ Press the PROGRAM key to display the next selection screen after the temperature setting is
completed.
Set TEMP
S01
(Selection screen)
DOOR
100℃
TROUBLE
ENTER CANCEL
(Decide the input)
DOOR
45℃
TROUBLE
ENTER CANCEL
(Cancel the input)
► 0℃
→
Set TEMP
S01
→
(Selection screen)
Set TEMP
S01
→
(Selection screen)
27
Operation Method
Set TEMP
0℃
S01
(Edition screen)
DOOR
100℃
TROUBLE
ENTER CANCEL
DOOR
0℃
TROUBLE
ENTER CANCEL