Dnd (Do Not Disturb); Call Block - Uniden XDECT 5135 series Owner's Manual

# Some of the functions may not be available under the power failure
back up system. Examples are:
• You cannot edit the phonebook (For eg, store a number).
• Redial/CID will not be stored.
• You cannot operate the Answering System
• You cannot operate the Bluetooth function.

DND (Do Not Disturb)

You can silence the ringers on the base and all handsets for a specific
period of time.
1) With the phone in standby, press and #DND hold on any handset. The
phone prompts you to select the number of hours (1 - 9 or Always On)
that you want it to stay in DND mode.
2) To confirm, press MENU/SELECT or just wait about 5 seconds. The
phone displays Do Not Disturb on each handset.
3) After the selected number of hours, the phone automatically exits DND
mode. To exit DND mode manually, press and hold #DND again.

Call Block

If you subscribe to Caller ID, you can save phone numbers to the call
block list. When a call comes in, the phone compares the received phone
number to the numbers on the call block list. If the phone number is on the
list, the phone replaces the caller's name with Call Blocked and blocks the
call.
The call block list holds 30 entries, and all handsets share the same list.
You can add entries by selecting Add Call Block in the CID menu that
displays after you have viewed the CID record or through the Call Blocking
menu (see below). (Only one handset can edit the call block list at a time.)
Call Blocking Menu Options
With the phone in standby, open the menu and select Call Blocking.
Choose one of these options:
To..
View Number
Create New
30
Press...
See the numbers on your call block list
Add an entry to your call block list. The phone will
prompt you to enter a name & phone number