USING SPECIAL FEATURES
Silent Mode (DND - Do not Disturb)
You can silence the ringers on all handsets for a specific period of time.
1.
With the phone in standby, press and hold
phone prompts you to select the number of hours (
that you want it to stay in silent mode.
2.
To confirm, press
displays
Silent Mode On
3.
After the selected number of hours, the phone automatically exits silent
mode. To exit silent mode manually, press and hold
Multihandset Features
To use the features in this section, you need at least 2 handsets.
#
Your base supports a total of 6 cordless handsets: the one that came
♦
with the base and up to 5 DECT 3005 accessory handsets.
You must register accessory handsets to the base before using them.
♦
(Handsets that came packaged with the base are already registered.)
Handsets that aren't registered display a
♦
For registration instructions, see p. 18, or see the accessory handset
manual.
If a handset was ever registered to a base, you must reset it before it
♦
can register to a new base; see p. 18, or see the accessory handset
manual.
Conference Calling
When an outside call comes in, two cordless handsets and the base
♦
can join in a conference call with the outside caller.
To join a call that's already in progress, just press
♦
handset.
To leave the conference call, hang up normally; the other handset
♦
remain connected to the call.
Call Transfer
To...
Press...
inTErcoM/clEar
transfer a
prompts you to select the handset you want to page.
call
When the other handset accepts the call, you'll be
disconnected (press
cancel a
Talk/FlaSh
transfer
#/dnd or just wait about 5 seconds. The phone
on each handset.
. The phone puts the call on hold and
Talk/FlaSh
to return to the call.
#/dnd on any handset. The
-
or
1
9
#/dnd again.
Not Registered message.
Talk/FlaSh
to rejoin the call).
)
Always On
on the
13