Uniden XDECT 5135 series Owner's Manual page 14

key (Icon)
UP
END/CLEAR
MENU/SELECT
CID
MUTE
MESSAGE
PhONEBOOk
SPEAkER
hOME/FLASh
DOWN
REDIAL/PAUSE
14
What it does
• In standby: increase the ringer volume.
• During a call: increase the audio volume.
• In any menu or list: move the cursor up one
line.
• During a call: hang up.
• In the menu or any list: exit and go to standby.
• When entering text or numbers: erase the
character at the cursor (press and hold to
erase all characters).
• Deletes the entry.
• In standby: open the menu.
• In menu or any list: select the highlighted item.
• In standby or during a call: open the caller ID
(CID) list.
• When entering text: move the cursor to the
right.
• During a call: mute the microphone.
• While the phone is ringing: ignore this call
(mute the ringer)
• In standby: access your answering system.
• In standby or during a call: open the
phonebook.
• In the menu: go back to the previous screen.
• When entering text: move the cursor to the left.
• Switch a normal call to the speakerphone (and
back).
• In standby: start a telephone call on your land
line (get a dial tone).
• While the land line is ringing: answer the
incoming call.
• During a call: switch to a waiting call.
• In standby: decrease the ringer volume.
• During a call: decrease the audio volume.
• In any menu or list: move the cursor down one
line.
• In standby: open the redial list.
• When entering a phone number: insert a
2-second pause.