Uniden XDECT 5135 series Owner's Manual page 27

For individual entry options, select a Mobile Link number and press MENU/
SELECT to display the following options:
To..
save this mobile phonebook
entry to the home phonebook
edit the current entry
delete the current entry
Adding Phonebook Entries (home only)
With the phone in standby, open the phonebook. Select Home and then
Create New. Enter a name and number and select a personal ring.
• Enter the phone number (up to 32 digits) exactly as you would dial it.
• If you need the phone to wait before sending the next set of digits, press
REDIAL/PAUSE to insert a 2-second pause. You can insert multiple
pauses, but each one counts as a digit (you'll see P in the display).
• To edit the name, press PhONEBOOk to move the cursor back and
insert a letter. Press END/CLEAR to delete a letter.
• To edit the number, press END/CLEAR to back up the cursor and
delete numbers. Re-enter the correct numbers.
Speed Dial
With the phone in standby, open the phonebook and select Speed Dial and
then select the speed dial number (0 through 9) you want to assign to this
entry.
• The speed dial numbers correspond to the numbers (0 through 9) on
the twelve key dial pad.
• Each speed dial number can be assigned to only one entry.
• If the speed dial number is already assigned, the phone shows the
name of the entry assigned to the number. If you want to change it,
select the number, and the phone overwrites the exisiting assignment.
Deleting All the Phonebook Entries
With the phone in standby, open the phonebook. Select the phone name
and then Delete All. To confirm, select Yes.
Press...
MENU/SELECT twice to open the
menu, then select Store Into PB.
MENU/SELECT twice to open the
menu, then select Edit.
MENU/SELECT twice to open the
menu, then select Delete. To confirm,
select Yes.
27