Sharp MX-4110N Installation Manual page 139

MX-5111N [33] Remote operation panel function Enable setting
1. General
To use the remote operation panel function, the password for the
remote operation panel function must be entered on the password
input menu displayed on the VNC boot screen. Note that, therefore,
the password must be set in advance to use the remote operation
panel function.
Let the user make the password, and use SIM26-78 to set it.
MEMO: After installation of an option, upgrade all the firmware's to
the latest versions.
2. Remote operation panel function
password setting procedures
1) Enter the SIM26-78 mode.
2) Enter the password with 10-key. (Within 5 - 8 digits)
The entered password is displayed on the column of "NEW."
To modify the entered password, use clear key to delete the
password digit by digit.
3) Press [SET] key, and the password is set.
MX-5111N Remote operation panel function Enable setting 33 – 1
Service Manual