Sharp MX-4110N Installation Manual page 132

: '11/Jul/25
1
B. Attachment to the IC card reader holder
1) Attach the card reader fixing tape to the IC card reader holder
referring to the notches as the reference.
* The holder type and the attachment procedure differ
depending on the kind of the IC card reader.
Holder type B
Y591-EHID-201 v01
Vertical and horizontal directions: Fit with the notches.
Holder type C
RDR-6081AKU, TWN3, RDR-7582AKU
Vertical direction: Fit with the notch.
Horizontal direction: Fit with the notch and the lower edge.
2) Cut out the boss.
* The cutting position of the boss of the IC card reader holder
differs depending on the kind of the IC card reader.
Holder type C
RDR-6081AKU, RDR-7582AKU
Holder type C
TWN3
3) Attach the IC card reader to the IC card reader holder accord-
ing to the attachment reference ribs.
* The attachment reference position differs depending on the
kind of the IC card reader.
Holder type B
Y591-EHID-201 v01
(No reference position)
MX-5111N IC card reader 32 – 2