Card Reading Test - Sharp MX-4110N Installation Manual

: '11/Jul/25
1
2) Setting
a) Enter the card reader setting menu as shown below.
System SettingsUser ManagementCard Type/Card
Reader Settings
b) Check-mark "Use IC Card for Authentication".
c) Press [Submit] button.
G. IC card recognition check
* There are two check methods of IC card recognition. Use either
one to check that the IC card reader is recognized.
Check method 1
1) Enter the card reader setting menu as shown below.
HomeSettingsSystem SettingsUSB-Device Check
2) Check to confirm that "Card Reader/Writer" is displayed.
Check method 2
Check to confirm that the icon of the card reader is displayed on the
system area of the home screen.
(If there is no check-mark on "Use IC Card for Authentication," the
icon is not displayed.)
H. External fixture attachment
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
1) Attach the operation panel cover.
3
2) Attach the front cabinet upper.
I. Making and importing of the setting file for HID
card reading
NOTE: The following procedures are executed only when a
request is made by a user for customizing the data format
of IC card reading.
1) Make the setting file for HID card reading.
For the making procedures, refer to the Manual of Setting File
for HID Card Reading.
2) Copy the setting file to a USB memory.
MX-5111N IC card reader 32 – 6
1
2
3
2
3
1
2