Table of Contents
Advertisement
5)
Remove the screws.
6)
Hold the sections A, and remove the DV cover in the arrow
direction (B).
A
A
B
7)
Supply developer (Packed items) in the developer unit.
* Shake the bag of developer with unopened state. After stir-
ring toner and developer in the bag, supply it to the develop-
ing unit.
* When replacing developer, use an extreme care not to drop
developer on the drive section (marked with ()).
A
MX-5111N MX-4110N/5110N/4111N/5111N/4112N/5112N (MAIN UNIT) 2 – 3
8)
Install the DV cover in the arrow direction A.
* When installing the DV cover, be sure to engage the pawl
with the boss.
9)
Secure the DV cover with the two screws.
10) Shake the developer unit horizontally a few times.
* When supplying developer, do not tilt the developing unit.
A
Hide quick links:
Advertisement
Table of Contents
