Installation Overview - Napoleon HYBRID 150 Installation And Operating Instructions Manual

9.6 GLASS REPLACEMENT
9.7 INSULATION INSERT REPLACEMENT
9.8 CREOSOTE FORMATION AND REMOVAL
9.8.1 MAINTENANCE OF THE EXCHANGERS
9.8.2 CHIMNEY MAINTENANCE
9.9 FILTERS
9.10 BLOWER MOTOR LUBRICATION
9.11 DOOR GASKET MAINTENANCE
9.12 CARE OF GLASS (IF EQUIPPED)
10.0 REPLACEMENTS
11.0 TROUBLE SHOOTING GUIDE
12.0 WARRANTY
13.0 SERVICE HISTORY
NOTE: Changes, other than editorial, are denoted by a vertical line in the margin.

1.0 INSTALLATION OVERVIEW

THIS APPLIANCE AND ITS COMPONENTS ARE DESIGNED TO BE INSTALLED AND OPERATED
AS A SYSTEM. ANY ALTERATION TO OR SUBSTITUTION FOR ITEMS IN THIS SYSTEM, UNLESS
ALLOWED BY THESE INSTALLATION INSTRUCTIONS, WILL VOID THE OMNI LISTING AND MAY VOID
THE WARRANTY. IT MAY ALSO CREATE A HAZARDOUS INSTALLATION. READ THROUGH THESE
INSTRUCTIONS THOROUGHLY BEFORE STARTING YOUR INSTALLATION AND FOLLOW THEM
HEAT EXCHANGER
(Section 9.8.1)
BLOWER MODULE
(Section 5.2)
BYPASS DAMPER
(Section 8.5)
ELECTRIC FURNACE
MODULE (Section 5.4)
OIL FURNACE MODULE
(Section 5.3)
WARNING
!
CAREFULLY THROUGHOUT YOUR PROJECT.
INSTALLATION OVERVIEW
H68.1
CHIMNEY INSTALLATION
(Section 6.0)
OUTSIDE COMBUSTION
AIR (Section 3.2)
PRIMARY AIR CONTROL
(Section 4.6)
RATING PLATE INFORMATION
(Section 2.4)
DOOR COMPONENT REPLACEMENT
(Section 9.6, 9.7)
SOLID FUEL FIREBOX
(Section 4.7)
EMBER STOP
(Section 6.6)
W415-1013 / C / 11.19.13
3
68
69
69
70
70
EN
71
71
71
71
72
73
74
75