Downloading Routes - Mercedes-Benz E-Class Coupe Operator's Manual

The Roadside Assistance Connected
sage appears in the display. If the Vehicle Health
Check can be started, the
cle Diagnostics Received Start vehi‐
cle diagnostics? message appears in the
display.
Press the Yes button to confirm the message.
X
When the Vehicle Diagnostics Please
X
Start Ignition message appears: turn the
SmartKey to position 2 in the ignition lock
( page 122).
Y
If the Please follow the instructions
X
received by phone and move your vehi‐
cle to a safe position.
appears: please follow the instructions
received by phone and move your vehicle to a
safe position.
The message in the display disappears.
The vehicle operating state check begins.
During this procedure, you will see the
cle Diagnostics Active
If you select Cancel, the Vehicle Health
Check is canceled completely.
When the check is complete, the
vehicle diagnostics data. (Voice con‐
nection may be interrupted during
data transfer) message appears. The vehicle
data can now be sent.
Press the OK button to confirm the message.
X
The voice connection with the Customer
Assistance Center is terminated.
The Vehicle Diagnostics: Transfer‐
ring Data... message appears.
The vehicle data is sent to the Customer
Assistance Center.
Depending on what the customer service rep-
resentative agreed with you, the voice connec-
tion is re-established after the transfer is com-
plete. If necessary, you will be contacted at a
later time by another means, e.g. by e-mail or
phone.
Another function of the Vehicle Health Check is
the transfer of service data to the Customer
Assistance Center. If a service is due, the display
shows a message to this effect together with
information about any special offers at your
workshop.
This information can also be called up under
"Owners Online" at http://www.mbusa.com.
Information on the data stored in the vehicle
( page 29).
Y
mes-
Request for Vehi‐
message
Vehi‐
message.
Sending
Information on Roadside Assistance
( page 26).
Y

Downloading routes

Downloading routes allows you to transfer and
save predefined routes in the navigation sys-
tem.
A route can be prepared and sent by either a
customer service representative or under "Own-
ers Online" at http://www.mbusa.com.
Each route can include up to four way points.
Once a route has been received by the naviga-
tion system, you will see the
nation ICON_POI_Category Name_1 has
been saved to "Previous destina‐
tions". Would you like to start navi‐
gation? message on the multimedia system
display.
The route is saved.
To start route guidance: select Yes.
X
An overview of the route is shown in the dis-
play.
If you select No, the saved route can be called
up later in the navigation menu.
Select Start.
X
Starting route guidance.
Downloaded and saved routes can be called up
again.
You can find further information in the separate
multimedia system operating instructions.
Speed alert
You can define the upper speed limit, which
must not be exceeded by the vehicle.
If this selected speed is exceeded by the vehicle,
a message will be sent to the Customer Assis-
tance Center. The Customer Assistance Center
then forwards this information to you.
You can select the way in which you receive this
information beforehand. Possible options
include text message, e-mail or an automated
call.
The data you receive contains the following
information:
the location where the speed limit was excee-
R
ded
the time at which the speed limit was excee-
R
ded
the selected speed limit which was exceeded
R
Features
249
External desti‐
Z