Instrument Cluster Lighting - Mercedes-Benz E-Class Coupe Operator's Manual

Menus and submenus
194
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Instrument Cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Permanent Display:
The current setting,
or Speedometer [km/h]/Speedometer
[mph], appears.
Press the a button to save the setting.
X
Lights
Setting the brightness of the instrument
cluster lighting and switches
The lighting in the instrument cluster, in the dis-
plays and the controls in the vehicle interior can
be adjusted with the
Switches: function.
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Brightness Display/Switches:
The current setting appears.
Press a to confirm.
X
Press the : or 9 button to adjust the
X
brightness to any level from
Level 5 (bright).
Press the a or % button to save the
X
setting.
If the light switch is set to the Ã, T or
L position, the brightness is dependent
upon the brightness of the ambient light.
i
The light sensor in the instrument cluster
automatically controls the brightness of the
multifunction display.
In daylight, the displays in the instrument
cluster are not illuminated.
Switching the daytime running lamps on/
off
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Lights submenu.
Press a to confirm.
X
Sett. menu.
submenu.
function.
Outside Temperature
Brightness Display/
Sett. menu.
function.
Level 1 to
Sett. menu.
Press the : or 9 button to select the
X
Day. Run. Lights
If the Day. Run. Lights
switched on, the multifunction display shows
the cone of light and the W symbol in
orange.
Press the a button to save the setting.
X
Further information on daytime running lamps
( page 103).
Y
Activating/deactivating surround light-
ing and exterior lighting delayed switch-
off
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Lights submenu.
Press a to confirm.
X
Using : or 9, select the
X
Lighting function.
If the Surround Lighting
ted, the light cone and the area around the
vehicle are displayed in orange in the multi-
function display.
Press the a button to save the setting.
X
Deactivating delayed switch-off of the exterior
lighting temporarily:
Before leaving the vehicle, turn the SmartKey
X
to position 0 in the ignition lock.
Turn the SmartKey to position 2 in the ignition
X
lock.
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the engine.
If you have activated the
function and the light switch is set to the Ã
position, the following functions are activated
when it is dark:
surround lighting: the exterior lighting
R
remains lit for 40 seconds after unlocking
with the SmartKey. If you start the engine, the
surround lighting is switched off and auto-
matic headlamp mode is activated
( page 103).
Y
exterior lighting delayed switch-off: the
R
exterior lighting remains lit for 60 seconds
after the engine is switched off. If you close all
the doors and the trunk lid, the exterior light-
ing goes off after 15 seconds.
function.
function has been
Sett. menu.
Surround
function is activa-
Surround Lighting