Bag Hook - Mercedes-Benz E-Class Coupe Operator's Manual

Stowage areas
238
Fold rear seat backrest ; forwards.
X
Move the driver's or front-passenger seat
X
back if necessary.
Folding the seat backrest back
!
Make sure that the seat belt does not
become trapped when folding the rear seat
backrest back. Otherwise, it could be dam-
aged.
Move the driver's or front-passenger seat
X
forward if necessary.
Fold rear seat backrest : back until it
X
engages.
If the rear seat backrest is not engaged and
locked, this will be shown in the multifunction
display in the instrument cluster. A warning
tone also sounds.
Move the driver's or front-passenger seat
X
back if necessary.
i
You should always engage the rear seat
backrests if you do not need the through-
loading feature. This will prevent unauthor-
ized access to the trunk from the vehicle inte-
rior.
Securing cargo
Cargo tie-down rings
General notes
Observe the following notes on securing loads:
Observe the loading guidelines (
R
Secure the load using the cargo tie-down
R
rings.
Distribute the load on the cargo tie-down
R
rings evenly.
Do not use elastic straps or nets to secure a
R
load, as these are only intended as an anti-slip
protection for light loads.
Do not route tie-downs across sharp edges or
R
corners.
Pad sharp edges for protection.
R
Trunk
Fold up cargo tie-down rings : next to the
X
rear seat backrest and put them through the
slots in the carpet.

Bag hook

G
WARNING
The bag hooks cannot restrain heavy objects
or items of luggage. Objects or items of lug-
gage could be flung around and thereby hit
vehicle occupants when braking or abruptly
changing directions. There is a risk of injury.
Only hang light objects on the bag hooks.
Never hang hard, sharp-edged or fragile
objects on the bag hooks.
!
The bag hook can bear a maximum load of
6.6lbs (3kg) and should not be used to secure
a load.
page 235).
Y