Settings - Mercedes-Benz E-Class Coupe Operator's Manual

Activating/deactivating Blind Spot
Assist
Press the = or ; button on the steering
X
wheel to select the DriveAssist
Press the 9 or : button to select
X
Blind Spot Assist.
Press the a button.
X
The current selection appears.
To activate/deactivate: press the a but-
X
ton again.
For further information about Blind Spot Assist,
see ( page 175).
Y
For further information about Active Blind Spot
Assist, see ( page 178).
Y
Activating/deactivating Lane Keeping
Assist
Press the = or ; button on the steering
X
wheel to select the DriveAssist
Press the 9 or : button to select
X
Lane Keep. Assist.
Press the a button.
X
The current selection appears.
Press a to confirm.
X
Press the : or 9 button to set Off,
X
Standard or Adaptive.
Press the a button to save the setting.
X
When Lane Keeping Assist or Active Lane
Keeping Assist is activated, the multifunction
display shows the lane markings as bright
lines in the assistance graphic.
For further information about Lane Keeping
Assist, see ( page 177).
Y
For further information about Active Lane Keep-
ing Assist, see ( page 181).
Y
Service menu
Depending on the equipment installed in the
vehicle, you have the following options in the
Serv. menu:
Calling up display messages in message
R
memory ( page 197)
Y
Checking the tire pressure electronically
R
( page 287)
Y
Calling up the service due date
R
( page 258)
Y
Settings menu
Introduction
Depending on the equipment installed in the
menu.
vehicle, you have the following options in the
Sett. menu:
Changing the instrument cluster settings
R
page 193)
(
Y
Changing the light settings (
R
Changing the vehicle settings (
R
Changing the convenience settings
R
( page 195)
Y
Restoring the factory settings (
R
Instrument cluster
Selecting the distance unit
The Display Unit Speed-/Odometer:
tion allows you to choose whether certain dis-
menu.
plays appear in kilometers or miles in the mul-
tifunction display.
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Instrument Cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Display Unit Speed-/Odometer
You will see the selected setting:
Press the a button to save the setting.
X
The selected unit of measurement for distance
applies to:
the digital speedometer in the
R
the odometer and trip odometer
R
the trip computer
R
the current consumption and the range
R
the navigation instructions in the
R
cruise control
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
R
Selecting permanent display
The Permanent Display:
to choose whether the multifunction display
always shows the outside temperature or the
speed.
The speed display is inverse to the speedome-
ter.
Menus and submenus
page 194)
Y
page 195)
Y
page 196)
Y
Sett. menu.
submenu.
km
Trip
function allows you
193
func-
function.
or miles.
menu
Navi menu
Z