Activation Conditions - Mercedes-Benz E-Class Coupe Operator's Manual

Hide thumbs Also See for E-Class Coupe:
Table of Contents

Advertisement

To deactivate DISTRONIC PLUS
=
?
To store the current speed or call up the last
stored speed
To set the specified minimum distance
A
Activating DISTRONIC PLUS

Activation conditions

In order to activate DISTRONIC PLUS, the fol-
lowing conditions must be fulfilled:
the engine must be started. It may take up to
R
two minutes after pulling away before
DISTRONIC PLUS is operational.
the parking brake must be released.
R
®
ESP
must be active, but not intervening.
R
Active Parking Assist must not be activated.
R
the transmission must be in position D.
R
the driver's door must be closed when you
R
shift from P to D or your seat belt must be
fastened.
the front-passenger door must be closed.
R
the vehicle must not skid.
R
Activating
Briefly pull the cruise control lever towards
X
you ;, or press it up : or down =.
DISTRONIC PLUS is selected.
Press the cruise control lever repeatedly
X
up : or down = until the desired speed is
set.
Remove your foot from the accelerator pedal.
X
Your vehicle adapts its speed to that of the
vehicle in front, but only up to the desired
stored speed.
If the vehicle in front of you is stationary, you can
only activate DISTRONIC PLUS once your vehi-
cle is stationary as well.
Driving systems
i
If you do not fully release the accelerator
pedal, the
DISTRONIC PLUS Override
sage appears in the multifunction display. The
set distance to a slower-moving vehicle in
front will then not be maintained. You will be
driving at the speed you determine by the
position of the accelerator pedal.
You can also activate DISTRONIC PLUS when
stationary. The lowest speed that can be set is
18 mph (30 km/h).
Briefly pull the cruise control lever towards
X
you ; up : or down = .
DISTRONIC PLUS is selected.
To activate at the current speed/last
stored speed
G
WARNING
If you call up the stored speed and it differs
from the current speed, the vehicle acceler-
ates or decelerates. If you do not know the
stored speed, the vehicle could accelerate or
brake unexpectedly. There is a risk of an acci-
dent.
Pay attention to the road and traffic condi-
tions before calling up the stored speed. If you
do not know the stored speed, store the
desired speed again.
Briefly pull the cruise control lever towards
X
you :.
Remove your foot from the accelerator pedal.
X
DISTRONIC PLUS is activated. The first time it
is activated, the current speed is stored. Oth-
erwise, it sets the vehicle cruise speed to the
previously stored value.
149
mes-
Z

Advertisement

Table of Contents
loading

Table of Contents