Camera - Mercedes-Benz E-Class Coupe Operator's Manual

Care
262
Always switch off the windshield wipers and
the ignition before cleaning the windshield or
wiper blades.
!
Do not pull the wiper blade. Otherwise, the
wiper blade could be damaged.
!
Do not clean wiper blades too often and do
not rub them too hard. Otherwise, the graph-
ite coating could be damaged. This could
cause wiper noise.
!
Hold the wiper arm securely when folding
back. The windshield could be damaged if the
wiper arm smacks against it suddenly.
Fold the windshield wiper arms away from the
X
windshield.
Carefully clean the wiper blades with a damp
X
cloth.
Fold the windshield wiper arms back again
X
before switching on the ignition.
Cleaning the exterior lighting
!
Only use cleaning agents or cleaning cloths
which are suitable for plastic light lenses.
Unsuitable cleaning agents or cleaning cloths
could scratch or damage the plastic light len-
ses.
Clean the plastic lenses of the exterior light-
X
ing using a wet sponge and a mild cleaning
agent, e.g. Mercedes-Benz car shampoo or
cleaning cloths.
Mirror turn signals
!
Only use cleaning agents or cleaning cloths
that are suitable for plastic lenses. Unsuitable
cleaning agents or cleaning cloths could
scratch or damage the plastic lenses of the
mirror turn signals.
Clean the plastic lenses of the mirror turn sig-
X
nals in the exterior mirror housing using a wet
sponge and mild cleaning agent, e.g.
Mercedes-Benz car shampoo or cleaning
cloths.
Cleaning the sensors
!
If you clean the sensors with a power
washer, make sure that you keep a distance
of at least 11.8 in (30 cm) between the vehicle
and the power washer nozzle. Information
about the correct distance is available from
the equipment manufacturer.
Clean sensors : of the driving systems with
X
water, car shampoo and a soft cloth.
Cleaning the rear view camera
!
Do not clean the camera lens and the area
around the rear view camera with a power
washer.
Use clear water and a soft cloth to clean cam-
X
era lens :.
Cleaning the 360° camera
!
Do not clean the camera lens and the area
around the 360° camera with a power
washer.360