Formatting Hard Drives; Selecting Hard Drive Types - Lorex LNR100 SERIES Instruction Manual

14 Using the Main Menu
2. Check the menus you would like to reset to default settings.
3. Click OK.

14.2.3 Formatting Hard Drives

You must format hard drives before you may use them with the system.
CAUTION
Formatting the HDD erases all data on the hard disk. This step cannot be undone. System settings will
not be erased.
To format a hard drive:
1. From Live View, right-click and select Main Menu.
2. Click >HDD Management.
3. Configure the following:
3.1. Under HDD No., select the hard drive you would like to format. Information about the hard drive
appears in the lower section of the menu.
3.2. Under Set to, select Format.
3.3. Click Apply. Click OK to confirm. Wait for the hard drive to format. Hard drives become Read/
Write hard drives by default when formatted.

14.2.4 Selecting Hard Drive Types

The system supports the following hard drive types:
#; r. 1.0/14396/14396; en-US
1
2
3
54