Table of Contents
Advertisement
Multi Edit Mode
About Multi Edit Mode
Once you are in Multi Edit Mode, press the soft buttons at the bottom of the screen
to navigate to each of the Multi Edit Mode pages. See the sections below for details on
navigating and changing parameters and Zones. All parameters apply only to the currently
selected Zone, except for parameters on the Common Page and certain controller parameters,
which apply to all Zones. On the Controls page, if a parameter is selected which applies to all
Zones, "All Zones" will be displayed in the top right corner of the display.
User Type: Advanced
This Chapter describes Multi Edit Mode when the Global Mode "User Type" parameter is set
to "Regular." When User Type is set to Advanced, Multi Edit Mode behaves the same way,
except you are able to access up to 16 Zones by using the Channel/Zone up/down buttons.
On the Multi Edit Overview page, Zones will be shown in groups of 4: 1-4, 5-8, 9-12 and
13-16. When User Type is set to Regular (the default), Multi Edit Mode can access 4 Zones.
For both User Type settings, a Multi can have a minimum of 4 Zones.
When User Type is set to Advanced, the Help soft button appears in Multi Edit Mode. Press
the Help soft button to view a list of the secondary functions of the Favorite buttons, such as
Duplicate Zone or Delete Zone. These secondary functions of the Favorite buttons will only
work in Multi Edit Mode.
When User Type is set to Advanced, you can create a new Zone by pressing Favorite button
7. Pressing Favorite button 7 duplicates the currently selected Zone. The duplicated Zone
will be added after the last zone of the Multi. A Multi can have a maximum of 16 Zones.
When User Type is set to Advanced, you can delete the current Zone by pressing Favorite
button 9. A Multi can have a minimum of 4 Zones.
9-2
Advertisement
Table of Contents
