Table of Contents
Advertisement
OPERATION
the display.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AS/PS button (18) for several
seconds, the radio searches from the
current frequency and checks the
signal strength until one cycle search
is finished. And then 6 strongest
stations
are
corresponding preset number button.
- Program scanning
Press AS/PS button (18) shortly to
scan preset station. When the field
strength level is more than the
threshold level of stop level, the radio
is holding at that preset number for
several seconds with release mute,
then searches again.
STATION STORING
Press any one of the preset buttons
(14) (1 to 6) to select a station, which
had been stored in the memory. Press
this button for several seconds (until
2ND beeps come out), current station is
stored into the number button.
MONO/STEREO
Press MON button (1) to select mono
or stereo mode. You can sometimes
improve reception of distant stations
by selection mono operation.
CD OPERATION
SWITCHING TO CD MODE
If there is no CD inserted in the driver:
Gently insert a CD with the printed
side
uppermost
compartment until you feel some
resistance. The CD is drawn into the
driver
automatically.
begins.
If a CD is already inserted in the driver:
Keep pressing MODE button (6)
shortly until the CD mode display
stored
into
the
into
the
CD
CD
playback
appears.
SELECTING TRACKS
Press
(16) to move to the previous track or the
following track. Track number shows on
display.
Hold
(16) to fast reverse or fast forward. CD
play starts from when you release the
button.
PAUSING/PLAYING
Press
player when in playback. Press it again
to resume play.
PREVIEWING ALL TRACKS
Press INTRO button (21) to play first
several seconds of each track on the
current disc. Press again to stop intro
and listen to track.
REPEATING THE SAME TRACK
Press RPT button (22) to continuously
repeat the same track. Press it again to
stop repeat.
PLAYING ALL TRACKS IN RANDOM
Press RDM button (23) to play all tracks
on
CD
"RANDOM" will appear on the display.
Press it again to cancel the function and
"RANDOM" will disappear.
EJECTING A DISC
Press
button (4) to stop CD playing
and eject the disc from the disc slot (5).
Note: When you first play a CD and when
whichever track is playing, press M5 button
(24) or M6 (25), the unit will search the disc
again and start to play the first track. Later,
there is no function of pressing M5 button
(24) or M6 button (25).
CAUTION：
When there are important files in the
CD-R(W), do not connect it to the main unit
to play. Because any wrong operation may
11
button (17) or
button (17) or
button (20) to pause CD
in
random
order.
button
button
And
Advertisement
Table of Contents
