Table of Contents
Advertisement
3. Press the pre-set button to be set and continue to hold it in. The volume will
be momentarily muted and the pre-set number will appear on the display
panel indicating that the station is now set into that memory position and can
be recalled at any time by pressing that pre-set button.
4. Repeat the above procedure to enter stations in the remaining 4 pre-set
memories on that band and the 5 memories on each of the other 2 bands of
the unit.
bo
LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency, time, and
activated functions.
NOTE: It is characteristic of LCD panels that, if subjected to cold
temperatures for an extended period of time, they may take
longer to illuminate than under normal conditions and the
visibility of the numbers may slightly decrease. The LCD read-
out will return to normal when the temperature increases to a
normal range.
bp
CASSETTEDOOR
Hold the cassette with the exposed tape edge to the right and insert it into the
cassette door. Depress fully until the cassette is engaged and begins playing.
When the cassette reaches the end of the side of the tape being played, the unit
will automatically change direction as shown by the arrow indication on the
display panel and play of the other side of the cassette will begin.
NOTE: Observe cassette Cautions in the Care and Maintenance
section of this manual.
bq
FAST-FORWARD BUTTON (FF)
Pushing the Fast-Forward button will cause the tape to move rapidly in the
forward direction of play (the direction arrow on the display panel will flash during
this operation). To stop Fast-Forward movement, lightly push the Rewind button
br
until the mechanism disengages and normal play resumes.
br
REWIND BUTTON (REW)
Pushing the Rewind button will cause the tape to move rapidly in the reverse
direction of play (the direction arrow on the display panel will flash during this
operation). To stop Rewind movement, lightly push the Fast-Forward button
until the mechanism disengages and normal play resumes.
bs
PROGRAMSELECTOR
To manually reverse tape direction and play the other side (program) of the
cassette, lightly push both the Fast-Forward
same time. The change of program will be shown by the direction arrows on the
display panel.
bt
TAPE PAUSE SELECTOR
Pressing this button will temporarily stop play of the tape (the
flash on the display panel). Press the button again to resume play of the tape
from the point at which it had stopped.
bq
and Rewind
-4-
bq
br
buttons at the
indication will
Advertisement
Table of Contents
