Safety Instructions - Furuno GP-170 Installation Manual

SAFETY INSTRUCTIONS

The installer must read the appropriate safety instructions before attempting to install the equipment.
WARNING
CAUTION
(Examples of symbols)
Warning, Caution
WARNING
Do not disassemble or modify
the equipment.
Fire, electrical shock or serious
injury can occur.
Turn off the power at the
switchboard before beginning
the installation.
Fire or electrical shock can result
if the power is left on.
Be sure that the power supply is
compatible with the voltage
rating of the equipment.
Connection of an incorrect power
supply can cause fire or damage
the equipment.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Prohibitive Action
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Display unit
GPA-021S
GPA-020S
GPA-017S
Mandatory Action
CAUTION
Ground the equipment to prevent
electrical shock and mutual
interference.
Use the proper fuse.
Use of an incorrect fuse may
damage the equipment.
Standard
compass
0.60m
0.30m
0.30m
0.30m
Steering
compass
0.40m
0.30m
0.30m
0.30m
i