Failure Modes - Metrologic MS9500 Voyager Series Installation And User Manual

Failure Modes

Flashing Green and one Razzberry Tone
This indicates the scanner has experienced a laser sub-
system failure. Return the unit for repair to an authorized
service center.
Flashing Red and Green with Two Razzberry Tones
This indicates the scanner has experienced a scanning
mechanism failure. Return the unit for repair to an
authorized service center.
Continuous Razzberry Tone with all LEDs off
If, upon power, the scanner emits a continuous razzberry
tone, then the scanner has an experienced an electronic
failure. Return the unit for repair to an authorized service
center.
Three Beeps – on power up
If the scanner beeps 3 times on power up then, the non-
volatile memory (NovRAM) that holds the scanner
configuration has failed. Return the unit for repair to an
authorized service center.
14