Scanner And Accessories - Metrologic MS9500 Voyager Series Installation And User Manual

Scanner and Accessories

The following list of parts may or may not be included in the MS9500 kit.
Voyager MS9520 Single-Line Laser Scanner, or
Voyager MS9540 – CodeGate™ Single-Line Laser Scanner
AC to DC Power Transformer – Regulated 5.2VDC @ 650 mA
output . One of the following may be included:
120 V United States: MLPN 45-45593
220 V – 240 V Continental European: MLPN 45-45591
220 V – 240 V United Kingdom: MLPN 45-45592
PowerLink Cable with built in power jack. One of the following may
be included:
Standard: MLPN 53xxx* - 2.7 m (9') coiled cord, long strain
relief
Optional: MLPN 54xxx* - 2.1 m (7') straight cord, short strain
relief
*xxx specifies connection to host
Stand with mounting accessories
Clip-in Stand: MLPN 46-46055, or
Mask Stand: MLPN 46-46128
Installation and User's Guide – MLPN 2410
Available on Metrologic website – www.metrologic.com
MetroSelect Scanner Configuration Guide – MLPN 2407
Available on Metrologic website – www.metrologic.com
Other items may be ordered for the specific protocol being used. To order
additional items, contact the dealer, distributor or call Metrologic's Customer
Service Department at 1-800-ID-METRO or 1-800-436-3876.
Caution:
To maintain compliance with applicable standards, all circuits connected to the scanner must
meet the requirements for SELV (Safety Extra Low Voltage) according to EN 60950.
To maintain compliance with standard CSA C22.2 No. 950/UL 1950 and norm EN 60950, the
power source should meet applicable performance requirements for a limited power source.
or
2