Metrologic MS9500 Voyager Series Installation And User Manual page 13

Assembling the Stand (continued)
Stand Option 2: Hard-mounted to countertop
2.00 in
2.00
in
#8 Wood
Screw
Step 1
Drill four #39 holes in the countertop.
Step 2
Secure the base (mlpn 36-36080)
Anchor
to the countertop with the four
#8 wood screws (mlpn 18-18057)
provided.
Step 3
Screw the anchor (mlpn 50-50449) onto
the base until it sits flush.
Base
Step 4
Remove the logo plate on the stand by
gently using an exacto knife to release the
plate hook.
Step 5
Position the stand over the base
assembly.
Step 6
Secure the stand to the base assembly by
tightening the set screw located under the
logo plate.
Step 7
Snap the logo plate back into place.
8