Double Din Head Unit Provisions - Metra Electronics 99-7581 Installation Instructions Manual

DOUBLE DIN HEAD UNIT/STACKED ISO
MOUNT UNITS PROVISIONS
1 Mount the factory brackets onto the
aftermarket radio or stacked ISO
units using the hardware supplied
with the new radio.
2 Remove the (2) T-20 Torx screws
from the factory a/c vents in the
factory radio trim panel that will
secure the DDIN trim plate. (Figure A)
3 Secure the DDIN trim plate to the
factory radio trim panel using the (2)
T20 Torx screws removed in step 2.
99-7581
A
5