Download Print this page
Metra Electronics 99-7581 Installation Instructions Manual

Metra Electronics 99-7581 Installation Instructions Manual

For nissan frontier 2005-2008, frontier (xe & se w/ no options) 2009, pathfinder 2005-2007 / 2008-2010 (s models only), xterra 2005-2008 / 2009-2010 (x models only); suzuki equator extended cab 2009-2010
Hide thumbs Also See for 99-7581:

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS FOR PART 99-7581
Pathfinder 2005-2007 / 2008-2010 (S models only)
Xterra 2005-2008 / 2009-2010 (X models only)
99-7581
KIT FEATURES
• DIN Head unit provisions with pocket
• ISO DIN Head unit provision with pocket
• Double DIN Head unit provision
• Stacked ISO Mounts Unit Provision
KIT COMPONENTS
A) Radio Housing • B) ISO Brackets • C) Trim Plate • D) Double DIN Trim Plate
A
C
T20 Torx Driver • Small Flat Blade Screwdriver • Phillips Screwdriver
1-800-221-0932
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION REV. 05-04-10
APPLICATIONS
Nissan
Frontier 2005-2008
Frontier (XE & SE w/ No Options) 2009
Suzuki
Equator Extended Cab 2009-2010
B
D
TOOLS REQUIRED:
www.metraonline.com
Harness & Antenna Adapter (sold separately)
• 70-7550 - 95-up Harness
• 70-7551 - Nissan Amp Integration Harness 95-up
• 40-NI10 - Nissan Antenna Adapter 05-09

Advertisement

loading

Summary of Contents for Metra Electronics 99-7581

  • Page 1 A) Radio Housing • B) ISO Brackets • C) Trim Plate • D) Double DIN Trim Plate T20 Torx Driver • Small Flat Blade Screwdriver • Phillips Screwdriver 1-800-221-0932 © COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION REV. 05-04-10 APPLICATIONS Nissan Frontier 2005-2008 Suzuki Harness &...
  • Page 2: Table Of Contents

    99-7581 DASH DISASSEMBLY Nissan Pathfinder 2005-2007/2008-10 (S models) ..1 Nissan Frontier 2005-2008 / Xterra 2005-2008/2009-10 (x models) Frontier 2009-10 (XE & SE w/ no options) ....2 KIT ASSEMBLY DIN Head Unit Provisions .
  • Page 3 Unclip and remove panel at top of radio and remove (1) Phillips screw underneath. (Figure C) Unclip and remove entire trim panel surrounding radio and including a/c controls. (Figure D) Remove (4) Phillips screws securing radio to remove. (Figure E) 99-7581...
  • Page 4: Frontier 2009-10 (Xe & Se W/ No Options)

    Unclip and remove panel at top of radio and remove (1) Phillips screw underneath. (Figure A) Unclip and remove entire trim panel surrounding radio and including a/c controls. (Figure B) Remove (4) Phillips screws securing radio to remove. (Figure C) 99-7581...
  • Page 5: Din Head Unit Provisions

    DIN HEAD UNIT PROVISIONS Slide the DIN cage into the radio housing and secure by bending the metal locking tabs down. (Figure A) Slide the aftermarket head unit into the cage and secure. (Figure B) 99-7581...
  • Page 6: Iso Din Head Unit Provisions

    99-7581 ISO DIN HEAD UNIT PROVISIONS Mount the ISO brackets to the head unit with the screws supplied with the unit. (Figure A) Slide the head unit into the radio opening until the side clips engage. (Figure B) Snap the trim plate into the radio...
  • Page 7: Double Din Head Unit Provisions

    DDIN trim plate. (Figure A) Secure the DDIN trim plate to the factory radio trim panel using the (2) T20 Torx screws removed in step 2. 99-7581...
  • Page 8: Final Assembly

    *NOTE: When Black a wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. 1-800-221-0932 REV. 05/04/10 © COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION INST95-7581 FINAL ASSEMBLY Strip wire ends back 1/2"...