Double Din Radio Provision - Metra Electronics 99-6510 Installation Instructions Manual

DOUBLE DIN RADIO PROVISION

1 Cut and remove center divider in
radio housing. (Figure A)
2 Snap the DDIN brackets to the
inside edge of the radio housing.
(Figure B)
Slide the DDIN radio unit into the
3
DDIN bracket/radio housing
assembly and secure the radio unit
to the kit using the screws sup-
plied with the radio unit. (Figure C)
4 Snap the DDIN trim-plate onto the
housing/radio assembly. (Figure D)
5 Continue to final assembly.
C
99-6510
12
KIT ASSEMBL Y
A
B
D