Metra Electronics 99-6536 Installation Instructions Manual
For jeep grand cherokee2014-2017
Hide thumbs
Also See for 99-6536:
- Installation instructions manual (14 pages) ,
- Installation instructions manual (16 pages)
Table of Contents
Advertisement
Available languages
Available languages
Quick Links
KIT COMPONENTS
• A) Radio trim panel with touchscreen display • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8" Phillips screws • E) (10) Panel clips
• F) HVAC interface and wiring harness (not shown) • G) Antenna adapter (not shown)
A
B
Metra. The World's Best Kits.
®
Jeep Grand Cherokee
Visit
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Touchscreen display for climate and personalization features
• Painted: Bronze - 99-6536BZ
Silver - 99-6536S
C
D
metraonline.com
2014-2017
E
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
99-6536
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly
–ISO DIN radio provision with pocket ..................4
–ISO DDIN radio provision .....................................4
Axxess Interface Installation ............................ 5-13
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface built into
touchscreen
Antenna Adapter: Included with kit
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32" Socket wrench • 5.5mm socket wrench
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 11/26/18 INST99-6536
Advertisement
Chapters
Table of Contents
Related Manuals for Metra Electronics 99-6536
Summary of Contents for Metra Electronics 99-6536
- Page 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. metraonline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 11/26/18 INST99-6536...
- Page 2 DASH DISASSEMBLY 1. Unclip and remove the radio/climate control panel. (Figure A) 2. Remove the (4) 9/32” screws securing the radio/display screen, and then unplug and remove. (Figure B) 3. Remove the (3) 5.5mm screws securing the black control module in the sub-dash, and then relocate lower to allow clearance for the aftermarket radio.
- Page 3 From the factory radio/climate control panel: 1. Unclip the vents from the back of the panel. (Figure A) To the 99-6536 radio trim panel: 1. Attach the vents to the back of the panel. (Figure B) 2. Attach the (10) panel clips provided.
- Page 4 KIT ASSEMBLY ISO DIN radio provision with pocket ISO DDIN radio provision 1. Attach the pocket to the radio brackets 1. Attach the brackets to the radio using using the (4) #8 x 3/8” Phillips screws the screws supplied with the radio. provided.
-
Page 5: Table Of Contents
AXXESS INTERFACE INSTALLATION INTERFACE FEATURES TABLE OF CONTENTS • Provides accessory power (12-volt 10-amp) Connections ..........................6-8 Installation ............................9 • Retains R.A.P. (retained accessory power) Programming ..........................9 • Provides NAV outputs (parking brake, reverse, speed sense) Final Assembly ..........................9 • Retains audio controls on the steering wheel Touchscreen Display Operation .....................10-11 •... -
Page 6: Connections
CONNECTIONS Attention! This interface will work with models that are either non-amplified, or amplified. From the 6536 harness to the aftermarket radio: Please follow the instructions carefully for your model vehicle. Failure to do so will result in • Connect the Black wire to the ground wire. either no sound, or low sound. - Page 7 CONNECTIONS (CONT.) Attention! This interface will work with models that are either non-amplified, or amplified. Please The following (3) wires are only for multimedia/navigation radios that require these wires. follow the instructions carefully for your model vehicle. Failure to do so will result in either no • Connect the Blue/Pink wire to the VSS/speed sense wire. sound, or low sound.
- Page 8 CONNECTIONS (CONT.) 3.5mm jack steering wheel control retention: 4-pin harness with yellow RCA jacks: The 3.5mm jack is to be used to retain audio controls on the steering wheel. • If retaining the factory backup camera to the touchscreen display is desired, connect the Yellow RCA jack labeled “Rearview camera”, to the Yellow RCA jack from the 6536 harness.
-
Page 9: Installation
INSTALLATION PROGRAMMING It is highly advisable to read the following steps beforehand, to ensure a clear understanding of 1. Refer to step 2 from the Installation section. what is to be expected. The following steps must be done in the order that they are numbered. 2. -
Page 10: Touchscreen Display Operation
TOUCHSCREEN DISPLAY OPERATION Climate Control screen Heated/Cooled Seats screen • This is the climate control screen which will be displayed on the touchscreen display. • This is the Heated/Cooled Seats, Heated Steering, and Mirror Dimming screen which will be This is considered the Main Menu screen. displayed on the touchscreen display. - Page 11 TOUCHSCREEN DISPLAY OPERATION (CONT.) Settings screen • Display • Engine Off Options - Factory features • System Configuration • Backlight - For controlling the color of the buttons • Steering Wheel Controls • About - Information regarding the software in the kit and back-light intensity.
-
Page 12: Steering Wheel Control Settings
STEERING WHEEL CONTROL SETTINGS Remap Button screen Dual Assign screen • The interface has the ability to change the button assignment for the steering wheel • The interface has the capability to assign two functions to a single button, except control audio buttons, except Volume-Up and Volume-Down. -
Page 13: Troubleshooting
STEERING WHEEL CONTROL SETTINGS (CONT.) Select Radio screen * Note: If the interface shows an Alpine radio, and you do not have an Alpine radio, that means the interface does not detect a radio connected it, i.e., an open connection. Verify that the 3.5mm jack is connected to the correct steering wheel jack/wire in the radio. - Page 14 1.800.221.0932 MetraOnline.com...
- Page 15 REV. 11/26/2018 INST99-6536...
- Page 16 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. metraonline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 11/26/18 INST99-6536...
- Page 17 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. metraonline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 11/27/18 INST99-6536...
- Page 18 DESMONTAJE DEL TABLERO 1. Desenganche y quite el panel del control de radio/clima. (Figura A) 2. Quite los (4) tornillos de 9/32” que fijan la pantalla/radio para después, desconectarla y retirarla. (Figura B) 3. Quite los (3) tornillos 5.5 mm que fijan el módulo de control negro en el tablero alterno;...
- Page 19 1. Quite las rejillas de la parte posterior del panel. (Figura A) Al panel de moldura de radio 99-6536: 1. Fije las rejillas a la parte posterior del panel. (Figura B) 2. Conecte los (10) ganchos de panel incluidos.
- Page 20 ENSAMBLE DEL KIT Provisión de radio ISO DIN con cavidad Provisión de radio ISO DDIN 1. Sujete una cavidad a los soportes del 1. Coloque los soportes en el radio usando radio usando los (4) tornillos Phillips #8 los tornillos que vienen con el radio. de 3/8”...
- Page 21 INSTALACIÓN DE LA INTERFASE AXXESS CARACTERÍSTICAS DE LA INTERFAZ INDICE • Provee corriente a accesorios (12 voltios 10 amperes) Conexiones ..........................6-8 • Retiene R.A.P. (corriente de accesorio retenida) Instalación .............................9 Programación ..........................9 • Cuenta con salidas de NAV (freno de mano, reversa, sensor de velocidad) Ensamble final ..........................9 •...
-
Page 22: Conexiones
CONEXIONES ¡Atención! Esta interfaz funcionará con modelos amplificados y no amplificados. Siga las Desde el arnés 6536 al radio de mercado secundario: instrucciones cuidadosamente para su modelo de vehículo. Ignorar las instrucciones ocasionará • Conecte el cable negro al cable de tierra. que no haya sonido o que el sonido sea bajo. - Page 23 CONEXIONES (CONT.) Los siguientes (3) cables son únicamente para radios con multimedios/navegación que ¡Atención! Esta interfaz funcionará con modelos amplificados y no amplificados. Siga las instrucciones cuidadosamente para su modelo de vehículo. Ignorar las instrucciones ocasionará requieren estos cables. que no haya sonido o que el sonido sea bajo. Si no está seguro de si su vehículo está amplificado •...
- Page 24 CONEXIONES (CONT.) La retención del control en volante con conector de 3.5 mm: Arnés de 4 pins con puerto RCA amarillo El conector de 3.5 mm se debe usar para retener los controles de audio en el control del volante. •...
-
Page 25: Instalación
INSTALACIÓN PROGRAMACIÓN Es altamente recomendable que lea los siguientes pasos con antelación para asegurarse de que comprende 1. Refer to step 2 from the Installation section. lo que debe hacer. Los siguientes pasos deben realizarse en el mismo orden que indican los números. 2. -
Page 26: Operación De Pantalla Táctil
OPERACIÓN DE PANTALLA TÁCTIL Pantalla de control de clima Asientos calefaccionados / refrigerados • Esta es la pantalla de control de clima que se mostrará en la pantalla táctil. Esta reciba el nombre • Esta es la pantalla de calefacción/enfriamiento de asientos, calefacción de volante y control de menú... - Page 27 OPERACIÓN DE PANTALLA TÁCTIL (CONT.) Pantalla de configuración • Display • Engine Off Options - Características de fábrica • System Configuration • Retroiluminación: para controlar el color de los botones • Steering Wheel Controls • About - Información sobre el software en el kit y la intensidad de la luz de fondo.
-
Page 28: Configuración De Control En Volante
CONFIGURACIÓN DE CONTROL EN VOLANTE Remap Button screen Dual Assign screen • La interfaz tiene la capacidad de cambiar la asignación de botones para los botones de • La interfaz tiene la capacidad de asignar dos funciones a un solo botón, excepto Volume-Up y audio de control del volante, excepto Volume-Up y Volume-Down. -
Page 29: Resolución De Problemas
CONFIGURACIÓN DE CONTROL EN VOLANTE Select Radio screen * Nota: Si la interfaz muestra una radio Alpine y no tiene una radio Alpine, eso significa que la interfaz no detecta una radio conectada, es decir, una conexión abierta. Verifique que el conector de 3.5 mm esté... - Page 30 1.800.221.0932 MetraOnline.com...
- Page 31 REV. 11/26/2018 INST99-6536...
- Page 32 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). Metra. The World’s Best Kits. metraonline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 11/27/18 INST99-6536...