Double Din Radio Provision - Metra Electronics 95-3527 Installation Instructions Manual

DOUBLE DIN RADIO PROVISION

*
Note: Refer also to the instructions included with the aftermarket radio.
1 Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure A)
2 Slide the Double DIN radio into the
Double DIN bracket/radio housing
assembly and secure the unit to the
kit using the screws supplied with
the radio. (Figure B)
3 Snap the Double DIN trim-plate onto
the front of the housing/radio assem-
bly. (Figure B)
Continue to final assembly.
95-3527 KIT ASSEMBL Y
2
A
B