DODGE RAM 1500 2006-2008
WITH MINI CENTER CONSOLE
RAM 2500/3500 2006-2008
1
Disconnect the negative battery terminal
to prevent an accidental short circuit.
If vehicle has floor shifter, remove shifter
2
knob.
3
Remove center console inserts, if present.
(Figure A)
Remove screws securing the rear center
4
console to the floor panel. Lift up on the
rear center console to clear the gear shift
lever, if present. (Figure B)
5
Remove screws securing the front center
console to the floor panel. Unclip and
remove the front center console.
(Figure C)
6
Loosen two 8 mm screws at bottom of
dash. Unsnap lower panel.
7
Remove (2) Phillips screws facing up on
front edge of radio/climate control panel.
(Figure D)
8
Unclip and remove entire panel sur-
rounding radio and climate controls,
including a/c vents. (Figure E)
9
Remove (4) 7MM screws securing radio
to dash and remove radio.
Continue to kit assembly.
D
99-6510
5
DASH DISASSEMBL Y
A
B
C
E