Dash Disassembly
All Vehicles
(Figure B)
CUT OUT
Cut bar
CUT BAR
(Figure D)
(Figure C)
TOP
Cut bar
CUT BAR
Double DIN radio provision
NOTE: Major sub dash modifications are necessary to use this dash kit.
You will need to trim the sub dash to gain suitable depth and height.
1. Attach the double DIN brackets
to the radio using the screws
supplied with the radio. (Figure A)
2. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS.
3. Re-connect the negative battery
terminal and test the radio for
proper operation.
4. Slide the double DIN radio
assembly into the modified sub
dash until it clicks into place.
5. Attach the appropriate double DIN
trim plate using the top (2) screw
positions of the climate control.
(Figure B)
6. Reassemble the rest of the dash in
reverse order of disassembly.
3
Kit Assembly
(Figure A)
(Figure B)