Dodge Ram 2006-08 (With Full Center Console) - Metra Electronics 99-6510 Installation Instructions Manual

For chrysler 300 2005-2007, aspen 2007; dodge caliber 2007-2008, charger 2005-2007, durango 2005-2007, magnum 2005-2007, ram 1500 2006-2008, ram 2500/3500 2006-2008, jeep commander 2006-2007, compass 2007-2008, grand cherokee 2005-2007, patriot 2007-2008
Hide thumbs Also See for 99-6510:
Table of Contents

Advertisement

DODGE RAM 1500 2006-2008
WITH FULL CENTER CONSOLE
RAM 2500/3500 2006-2008
1
Disconnect the negative battery terminal
to prevent an accidental short circuit.
2
If vehicle has floor shifter, remove shifter
knob.
Unsnap and remove console front top
3
cover (closest to the dash). (Figure A)
4
Remove two 8 mm screws from under
console cover (previously removed).
Remove front section of console.
(Figure B)
5
Loosen two 8 mm screws at bottom of
dash. Unsnap lower panel.
6
Remove (2) Phillips screws facing up on
front edge of radio/climate control panel.
(Figure C)
7
Unclip and remove entire panel surrounding
radio and climate controls, including a/c
vents. (Figure D)
8
Remove (4) 7MM screws securing radio
to dash and remove radio.
9
Continue to kit assembly.
99-6510
6
DASH DISASSEMBL Y
A
B
C
D

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents