Double Din Radio Provision - Metra Electronics 99-9105 Installation Instructions Manual

DOUBLE DIN RADIO PROVISION

Cut and remove center divider
1
from radio housing. (Figure A)
2 Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure B)
3 Slide the Double DIN radio into the
Double DIN bracket/radio housing
assembly and secure the unit to the
kit using the screws supplied with
the radio. (Figure C)
4 Snap the Double DIN trim-plate onto
the housing/radio assembly.
(Figure D)
Continue to final assembly.
D
99-9105
4
KIT ASSEMBL Y
A
B
C