Arming The System - Subaru Impreza 2016 Owner's Manual

. Turn the push-button ignition to the
ACC position (models with keyless
access with push-button start system ).
NOTE
Only registered keys will stop the
alarm. If the immobilizer transponder
is not registered, the alarm will not
stop.

Arming the system

Tips
. The system can be armed even if the
engine hood, windows and/or moonroof
are open. Always make sure that they are
fully closed before arming the system.
. The 30-second standby time can be
eliminated if you prefer. Have it performed
by your SUBARU dealer.
. If your vehicle is a 4-door and you open
the trunk using the access key/remote
transmitter s button with the alarm
system armed, the system will be tem-
porarily placed in a standby state. The
system will go back to the surveillance
state upon locking the trunk.
. The system is in the standby mode for
a 30-second period after locking the doors
with the remote transmitter. The security
indicator light will flash at short intervals
during this period.
. If any of the following actions are done
during the standby period, the system will
not switch to the surveillance state.
Doors (including the rear gate/trunk
lid) are unlocked using the access key/
remote transmitter.
Doors (including the rear gate/trunk
lid) are unlocked using the keyless
access function (models with keyless
access with push-button start sys-
tem ).
Any door (including the rear gate/
trunk lid) is opened.
The ignition switch is turned to the
ON position (models without keyless
access with push-button start sys-
tem ).
Push-button ignition switch is
turned to the ACC position (models
with keyless access with push-button
start system ).
To arm the system using access
key/remote transmitter
1. Close all windows and the moonroof (if
equipped).
2. Remove the key from the ignition
switch (models without keyless access
with push-button start system )/turn the
push-button ignition switch to the OFF
position (models with keyless access with
push-button start system ).
Keys and doors/Alarm system
3. Open the doors and get out of the
vehicle.
4. Make sure that the engine hood (and
the trunk lid on the 4-door) are locked.
5. Close all doors (and the rear gate on
the 5-door).
Access key
1) Arm button: Press to arm the system
2) Disarm button: Press to disarm the
system
CONTINUED
2-29