Subaru Impreza 2016 Owner's Manual page 228

Auto light sensor sensitivity setting
1. Perform the preparation steps accord-
ing to Preparation for car settings
2. Operate the or
select the Auto Light Sensor item. Then
push the button.
3. The current setting will be displayed.
Push the button to enter the selection
3-78.
mode.
switch to
4. Select the preferred setting by operat-
ing the or
Instruments and controls/Multi function display
button.
5. Select Set by operating the
switch, and confirm the setting by pushing
the
6. The system will notify you that the
switch. Then push the setting is complete.
3-83
button.
CONTINUED