Selection Of Manual Mode (If Equipped) - Subaru Impreza 2016 Owner's Manual

7-26
Starting and operating/Continuously variable transmission
NOTE
If the select lever is in the N position
when you stop the engine for parking,
you may not subsequently be able to
move it to the R and P positions. If
this happens, turn the ignition switch to
the ON position. You will then be able
to move the select lever to the
position.
D (Drive)
This position is for normal driving. The
transmission shifts automatically and con-
tinuously into a suitable gear according to
the vehicle speed and the acceleration
you require. Also, while driving up and
down a hill, the transmission assists and
controls the driving performance and
engine braking while corresponding to
the road grade.
When more acceleration is required in D
position, depress the accelerator pedal
fully to the floor and hold that position. The
transmission will automatically downshift.
In this case, the transmission will operate
like a conventional automatic transmis-
sion. When you release the pedal, the
transmission will return to the original gear
position.
For models with manual mode, if one of
the shift paddles behind the steering
wheel is operated while driving in the D
position, the transmission will temporarily
switch to the manual mode. In this mode,
you can shift into any gear position using
the shift paddles. For details about the
manual mode, refer to
manual mode 7-26. Once the vehicle
speed stabilizes, the transmission will
P
switch from the manual mode back to
the D position for normal driving.
Selection of manual mode (if
equipped)
With the vehicle either moving or station-
ary, move the select lever from the D
position to the M position to select the
manual mode.
Selection of
Type A
1) Upshift indicator
2) Downshift indicator
3) Gear position indicator