To Use Video Analytics - Samsung SND-6083 User Manual

setup screen

to use video analytics

It detects event that meets all conditions specified by sensitivity, size and area and the
event condition rules.
1. Select the video analysis mode.
2. Set <Sensitivity>, <Size> and <area>.
For further details on settings, refer
to "to use motion detection". (Page
126~127)
3. Select <analytics> tab.
4. Select the video analysis type.
• Passing : Detects an object passing
by the line set by a user.
• Entering/Exiting : Detects an object
entering or exiting into/from the area
set by a user.
• Appearing (Disappearing) : Detects
motions of appearing on or
disappearing from the user-defined
area or the entire screen area.
5. Set the video analysis rules.
For further details on settings, refer to
"to set the video analysis rules".
(page 129~130)
6. When done, click [apply (
128_ setup screen
)].